Hey #ASUS–I hope you know this…

I don’t know how to start this blog entry as even till the time I am writing this blog entry, my disappointment still heavily felt.

 

Disclaimer #1

I have always been an avid lover/fan of ASUS networking products because the team have really engineered their networking router to be so fantastic that I ditched those router that was given by the Internet Service Provider (ISP). I have to admit that most of visits from searches in Singapore is generated through related searches on ASUS router or SingTel fibre. I have always been a strong supporter in advocating people around me to take on the ASUS networking products bandwagon.

 

Disclaimer #2

This time round, I am not writing any negative with regards to the networking side of things about ASUS. Although this may be a negative post, it will not discourage me in still supporting the networking side of business for ASUS.

 

Background

It all started couple of months ago when I chanced upon an advertisement on ASUS soon-to-be launched ZenFone 2. The advertisement was hitting almost everywhere in the social media where ASUS claims to be the first smartphone that is equip with 4 gigabytes of RAM. At the point of time, “Wow, 4GB is so godly!”

Before I decided to use this phone, I was lugging onto two mobile phones. One of it is Samsung Galaxy Note 3 (personal device) and another one is Samsung Galaxy Note 4 (corporate device). I have two SIM card with two different numbers which I need to have it with me all (most) of the time.

The reason why I would step onto the ASUS platform is because:

  1. It is LTE-enabled phone (although it is only for SIM #1, but it doesn’t really matter to me because most of the time it should only utilize data from one number).
  2. It is dual-SIM and dual-active! (this is amazing! if you still don’t know why Dual-Active is better, check out this link here).
  3. It has 4GB of RAM. 4GB is more than 3GB on each of my Note-series of Samsung device, so it is an upgrade right?

 

The Preview

So it started with me getting an invite to the launch of ASUS ZenFone 2 in Singapore way back in April (to be exact, 14th April 2015 @ Suntec City Convention Centre). During the show, practically all the partners and invited popular bloggers are given one set of the ASUS ZenFone 2 for them to do the preview and trial of the mobile device. On the other hand, attendees who was invited to the event is able to make purchase of the monster device (and how it was market was being the first in country or region to be the first batch that uses this godly device!). So at the price of SGD 429, attendees is able to walk home with a happy mood and anxious moments to rip the box up to unveil the inner beauty of the little monster!

 

The Course

Overall, the user-experience of the phone and the overall impression that I get from this phone is really awesome. Although it is slightly heavy but it is so much better for me where I do not need to lug two devices with me all the time.

When ASUS announced that they are all ready to release the rest of the devices (lower-end models where it comes with 5 inch or 5.5 inch with approximately 2GB of RAM), I totally do not even consider about it and quickly placed an order for the 5 inch one as a present to my dad. At that point of time, my dad was using the XiaoMi 1s where it is his first smart phone that he has been using for awhile until it decided to be a little cranky. So, without even considering that it will be hard for him to adopt, I persuaded him that it is the best choice because I have been a happy user for weeks.

 

Half-Time (Summary)

At this point of time, we already have two devices under the hood right now where the father and son are both using it.

 

Let the action roll…

Well, after a couple of days into using the device, my dad suddenly feedback to me on the first issue he had with the phone.

Problem (ASUS ZenFone 2, 5 inch – Dad’s Phone): The phone loses connectivity to the network all of a sudden. No calls can be received and no data can go through too.

Troubleshooting Steps:

  1. Restart the device: Did this so many times until we can’t remember exactly how many times we did it in order to have the network recovered.
  2. Change of SIM Card: Well, naturally such problem scenario could be problem lead by the failure on the network but it seems like it is not because none of us within the family is using any other telecom except for Singapore Telecommunications (SingTel). Therefore, this problem is definitely ruled out. So I realized that the SIM card in the phone may be faulty because my dad has been using it for years so I went to the SingTel shop to get it replaced.
  3. Hard reset the device: We could barely remember how many times we did a factory reset on the phone!

Before I continue with part two of the ranting, let’s look into problem scenario for my own phone.

Problem (ASUS ZenFone 2, 5.5 inch, 4GB RAM – my phone): This is one weird problem with the phone. So the sequence is as followed:

  1. Out of the sudden, the phone will get heated up by itself.
  2. The screen will display the round image where it appears only when you uses the ASUS ZenFone flip cover. (The smart screen)
  3. Nothing you do will wake the phone up non shut it down.
  4. Do note that for this series, the battery is embedded and is not able to be removed.
  5. So it will drain the battery up by itself within a couple of minutes.
  6. Then it will just be dead, just dead.

There is simply nothing I can do to troubleshoot this device as it is beyond my level. So I headed over to the service centre at 313 Orchard to get it fix.

 

Where the frustrations lies…

Here we go:

Have been to the ASUS Service Centre on the following dates:

    • 21st May 2015 – Sent in my ASUS ZenFone 2 (4GB) to repair
    • 23rd May 2015 – Sent in my dad ASUS ZenFone 2 (2GB) to repair and to collect my ASUS ZenFone 2 (4GB).
    • 24th May 2015 – Sent in my ASUS ZenFone 2 (4GB) AGAIN and collected my dad ASUS ZenFone 2 (2GB).
    • 26th May 2015 – Collected my ASUS ZenFone 2 (4GB)

And what’s the result till now? Both device still doesn’t work at all.

 

  1. Look at the frequency that I have been visiting the service centre although it is for two devices.
  2. Every time I collected my device, I asked the customer service officer (CSO) on what was fixed but all they could tell me is that some parts has been replaced and tested. This is not good enough in my opinion.

Let’s take a look at some of the screen shot I have in terms of the receipt for the repair:

Dad’s ZenFone 2 (2GB)

So the engineer within ASUS Singapore have determined it is the motherboard that is faulty, therefore they have replaced it. However, problem still persists after changing the heart of the device.

 

My ZenFone 2 (4GB)

So, all the ASUS engineer could do is to change the motherboard. Now, I wonder, is it changing from someone else reported set to my device and shit just goes round and round.

Patience level getting thinner and thinner.

Where I think the problem lies…

So let’s summarize on my thoughts on where the problem actually lies:

  1. The product actually sucks. Well, someone elsewhere may/would defer my statement as they may be enjoying their own set right now. It is ok, this is just my personal perspective or rather a perspective at least from a family of two out of fives putting our pledge and trust on ASUS mobile devices.
  2. The service centre that ASUS Headquarter has contracted to sucks. It is because they are the only contact person I ever spoke to during my whole period of getting my mobile device working fine all over again. No matter how much unhappiness I pour onto them, all they can do is to accept it and forget about it. I couldn’t explain more than enough my frustrations, the first time ever in my life after using the LG brand many years back where I have so much problem with the mobile phone.
  3. The engineer who are doing the actual fixing sucks. Well, all I could say they are the king behind the scene because whatever action they do, they either made one customer a happy person or a simple tweak on the phone could potentially just pissed another customer away. So, I am the lucky one.
  4. There is simply no clear communications between the service centre and the technical team that is doing the fixing. Look at the image below:

You saw? +Serv is the authorized service centre where it is part of ASUS job to outsource as much process as possible in order to make life easier for everywhere especially ASUS has been trying to lower the responsibility on customer support.

What’s next?

Well, all I could say is:

  1. ASUS, I have given up on your mobile phone device business. I shall not be contributing to the success of your BU anymore.
  2. Now the two devices are sitting in the drawer potentially being another paperweight (really an expensive one with no unique design).

I had my fair share of ranting, if you think you could regain my confidence level in you, please feel free to reach out to me. Else, let’s bid farewell and hope buyers out there who are thinking of getting a ZenFone 2 device, please do enough research before jumping into action!

Cheers,
Milton

Hey #ASUS–I hope you know this…

Silly Mistake

Just two nights ago when I was happily opening up the wrapper for my new router, ASUS RT-AC3200, thinking that it always easy to configure this brand of router as it is purely chicken feet!

However, this time round, it took me more than 30 minutes to get things right which I find it really wrong as I am a loyal fan of ASUS in terms of their networking side of business. (Previously using RT-N66U – known as the Black Knight).

So to give a slight background of why it is not a clear-cut configuration while the firmware itself has already catered to what our Internet Service Providers (ISP) is required in terms of the settings. I am signed up with our local telecom (SingTel) on their Mio plan where I have both the Fibre Internet connection and Cable TV box that is connected using the Fibre connection.

In the past, customer usually have to rely heavily on the hardware provided by SingTel or even any other providers out there due to the configuration that is preset on the router itself to allow connection to services like TV (Mio-TV) and Voices (Mio-Voice). So we are blessed that ASUS have that all covered for us in a few clicks and all is done.

Now the problem is that, I was way to excited to use this new monster and I have plug my ethernet lan cable from the router to my computer (while doing configuration) to lan port 4. This port is proprietary to the Cable Services (Mio-TV) so naturally it doesn’t seems to work for me. So the error occurred when ever I am trying to pull in the DNS configuration automatically, the screen would have frozen. So I thought, “Oh Shucks”, did this monster just died on me!

So the only thing I could do is to do a hard reset on the router to return it to the factory configuration and try all over again! So I did it for more than thrice (blame it on the eagerness in me from the support background). So in the end, I finally realise that whenever I reaches to the DNS configuration page, my computer will lose it IP address and in return gotten the private IP. Feeling amiss, I look at the port that I have used on the router.

This is really a silly mistake that I have ever made. Hope my dear readers will take note while configuring their ASUS router.

Cheers,
Milton

Silly Mistake

I seems to love with “66”. Welcome ASUS EA-N66 to the family! :)

After the introduction of the ASUS RT-N66U to the family previously here, I am still not satisfied with the speed that I am getting through the HomePlug that I have been using all along. Just for informational sake, I am using AzTech HomePlug through out of my whole house but due to the way electricity cable is being laid, I can’t seems to get anything more than 20Mbps of speed to my lab server situated in my room.

Therefore, as a technology freak, I went ahead to do some slight research and decided that I should be doing something to further boost the ROI for the hard-earned money that I have been paying to my internet service provider monthly. Therefore, I narrowed down to using Repeater or Access Point, however, there are so many brands available in the market! How?!

Was looking at my RT-N66U box, I saw that there is this product that is compatible or somehow in the marketing term that explains it is designed to best work with the following family line of products. So I saw ASUS EA-N66 which fits my needs.

I like the packaging, it is pretty unique even though it is simple.

I like it when the design team focus a lot on telling the customer how they can make use of their product despite having a small area to work with on the creativity portion.

Some simple un-boxing to show the items within the box. Pretty organized and I love the word “VIP”. 🙂 I will be filling in with some network diagram of how I deployed it within my home and how I fully utilize the power and features of these two monsters!

Cheers.

I seems to love with “66”. Welcome ASUS EA-N66 to the family! :)

Welcome ASUS RT-N66U to the Family!

A couple of days ago, I finally decided that I cannot live on with the router that was given when I signed up with my Fiber Optic Internet Package with Singtel. It simply doesn’t meet the requirements that I have and partially I am yearning for performance since I am subscribed to 150Mbps of bandwidth. Getting a better router has been on the top of my head for awhile, or rather months, but I didn’t make that swift move due to some cash-flow reasons where the priority of the router isn’t up on my top 3 ‘must-spend’.

After much reading on all the reviews that are available on HardWareZone (HWZ) forum, I wouldn’t go wrong with this router. Therefore, I decided to compliment ASUS products by writing a few posts to describe the process that I have since day 1. In today post, it will be about the “Setup” of this beautiful monster.

ASUS have designed their firmware to be packed with user-experience that makes setup simple, neat and organized. Let’s see why I said that…

I was wondering, how amazing they have done it. This wizard opens up in my favorite browser the moment I am connected to the router network. Simply amazing! Rather than the usual one where I have to enter “192.168.1.1” after launching the browser and have to key in the usual username and password. Amazing welcome page!

 

It’s awesome that “security” is being focus here. Instead of bringing you round and round in the panel, it just bring your attention to the screen and explain the importance of changing the default password away.

 

This is the part that once again simplified the life of us consumers especially the Non-IT Savvy folks. By checking the checkbox “Special Requirements from ISP”, I am able to select the profile settings for Singtel Fiber Optic. There are also profile that are built in such as M1 and Singtel MIO.

 

Enter the hostname and mac address, as shown in the image, it’s optional. Although there is no harm in entering the value but it really depends on individual.

 

Enter your preferred DNS server, however I always choose to let my Network Terminal to decide what is given by the Internet Service Provider (ISP).

 

Step by step with pictorial explanation is really more than what consumer is expecting! I simply love the way how things are made simple!

 

There goes the connection setup process…

 

Although at times to times people will meet into error, but neverthelessly it is a good learning experience. The reason why I am getting this error above is because I didn’t select the Singtel profile at the start instead. I was trying to force the router to pull the configuration settings from my ONT (Terminal Box) but since selecting the profile is just one more click away, it shouldn’t be much of a problem to do so to avoid such error.

 

The best practices that can advise to anyone out there, if you are setting your router for the first time, ALWAYS update to the latest firmware unless you know why you wouldn’t need to do so!

In the next post, I will talk about adding one more companion to the existing network to extend the network speed to my lab server that is located in the room.

Cheers.

 

Welcome ASUS RT-N66U to the Family!